Furuno GP-1610CF Manual De Usuario

6-3

6.5 Entering the MOB Mark

The MOB mark functions to mark man over-
board position. The range and bearing to the
MOB position are continuously updated on
the display, to help you navigate to the MOB
position.

Entering the MOB mark

1. Press the EVENT MOB key over 3 sec-

onds. The MOB mark appears at own
ship's position along with a flag. The
MOB position is automatically selected
as destination and the range and bearing
from own ship to the MOB position are
displayed.

Saved MOB position !!

ENT: Yes

ESC: No

130˚ 00.066’E

32˚ 59.660’N

Begin navigation
to the MOB waypoint
Are you sure?

Figure 6-4 MOB position display

2. Press the MENU key. (If an autopilot is

connected press the ENT key.)

Man
overboad

Range, bearing

Current

position

MOB 120.0

0.8nm

CSE 180.0

SPD 16.8kt 2D

DEP 110m TMP 16.0

C 14:50

POS 34

26.345'N 135

41.232'E

MOB
mark

Bearing and range
to MOB position

Destination
"flag"

Figure 6-5 MOB concept

To erase the MOB mark, clear the memory
as shown in paragraph 14.9 Clearing the
Memory on page 14-7.

Cancelling MOB position as
destination

1. Press the GOTO key.

SELECT GOTO MODE

ENT: Sel CLR: Release

ESC: Cancel

WPT List

EVENT List

ROUTE List

Cursor/Route plan

Figure 6-6 GOTO selection screen

2. Press the CLR key. You are asked if you

want to cancel MOB position as GOTO.

RELEASE GOTO

ENT: Yes

ESC: No

3. Press the ENT key.

4. Press the MENU key.

6.6 Erasing All Marks

All marks can be erased collectively. Be ab-
solutely sure you want to erase all marks; they
cannot be restored once erased.

1. Press the MENU key.

2. Press the [3] key to select ERASE

TRACK/MARK.

ERASE TRACK/MARK

MARK ERASE

TRACK ERASE

MARK USED

TRACK USED

0/100 PT

0/2000 PT

YES

Figure 6-7 Erase track/mark menu

3. Operate the Cursor Pad to select MARK

ERASE.