Furuno GP-1610CF Manual De Usuario
14-5
Display test
1. Press the MENU key to display the main
menu.
2. Press the [0] key to select SYSTEM
MENU. The system menu appears.
3. Press the [1] key to select SELF TEST.
4. Press the [4] key to select DISPLAY
TEST.
DISPLAY TEST
WHT
GRN
BLU
BLK
WHT
RED
GRN
BLU
BLK
RED
ENT: Change Mode ESC: Esc
Figure 14-3 Display test pattern
5. Check that colors are properly displayed.
Press the ENT key to change test pattern.
6. To escape, press the ESC key three times.
14.6 GPS Monitor Display
The GPS monitor display provides informa-
tion on all GPS satellites.
tion on all GPS satellites.
1. Press the MENU key.
2. Press the [0] to select SYSTEM MENU.
3. Press the [1] key twice to display the GPS
monitor display.
Fix Mode
DOP
Data Rx
Ref Sta
Program No.
Rx Status
No.
23
12
29
27
1
17
26
5
2D
: — —
: — —
48501030**
ESC: Esc
ELV
77
16
30
50
21
18
27
52
AZM
278
042
100
050
303
220
095
142
SNR
40
70
40
60
30
50
35
60
Status of
DGPS Rx
data
DGPS Rx
data
Status of
DGPS REF
station
DGPS REF
station
Alt
——— m
1
**: Version no.
GPS MONITOR DISPLAY
GPS
Program no.
Program no.
Indicated at 3D mode
Figure 14-4 Sample GPS monitor display
GPS monitor display description
Fix Mode: This shows current position-fix-
ing mode; 2D or 3D (D2D or D3D appears in
DPGS mode).
ing mode; 2D or 3D (D2D or D3D appears in
DPGS mode).
Alt: Shows present altitude of GPS receiver
when position fixing mode is set to 3D.
when position fixing mode is set to 3D.
DOP: This is the index for position-fixing
accuracy. The lower the value the higher the
accuracy. If the index exceeds 20, position fix-
ing may not be possible.
accuracy. The lower the value the higher the
accuracy. If the index exceeds 20, position fix-
ing may not be possible.