Intel SC450NX Manual De Usuario

24

To be installed in a rack, the server needs a new bezel frame with rectangular cutouts where the
chassis handles fit.  You need to remove the old bezel frame and install the new one from the rack kit.

1.  Remove the bezel door: with the door open all the way (to the left), lift it upward to release it

from its hinges on the chassis.

2.  Remove the bezel frame: disengage the tabs that attach the bezel frame to the chassis by pressing

each tab toward the center of the chassis while pulling the frame away.

3.  Attach the new bezel frame by reinserting the tabs into their corresponding rectangular slots on

the chassis.

4.  Reattach the bezel door to its hinges on the chassis.
5.  Continue the procedures beginning with “Attach the Chassis Handles” (page 14) through “Install

the Server in the Rack” (page 18).