Polycom 1500/1800/2000/4000 Manual De Usuario

 

Start a Conference

Polycom, Inc. 

373

 ID

Enter the unique-per-MCU conference ID. If left blank, the MCU automatically assigns 
a number once the conference is launched. 
This ID must be communicated to conference participants to enable them to dial in to 
the conference.
Note: If setting the Conference ID to the digits that are used for MCU prefix in 
Gatekeeper (for example gatekeeper prefix is set to 10 and the conference ID is 1001), 
the system will not be able to dial to the destination conference as the prefix digits are 
truncated from the conference ID, preventing the system from locating it.
Note: If SIP Factories are used do not use the number 7001 as an ID. 7001 is the 
default SIP Factory ID.

Conference Password

Enter a password to be used by participants to access the conference. If left blank, no 
password is assigned to the conference. 
This password is valid only in conferences that are configured to prompt for a 
conference password. 
This field is numeric and has a default length of 4 characters. The administrator can 
modify it in the Setup >System Configuration settings. For more information, see 

The Collaboration Server can be configured to automatically generate conference (and 
chairperson) passwords when these fields are left blank. For more information, see 

Chairperson Password

Enter a password to be used by the Collaboration Server to identify the Chairperson 
and grant him/her additional privileges. If left blank, no chairperson password is 
assigned to the conference. This password is valid only in conferences that are 
configured to prompt for a chairperson password.
This field is numeric and has a default length of 4 characters. The administrator can 
modify it in the Setup > System Configuration settings. For more information, see 

The RealPresence Collaboration Server can be configured to automatically generate 
chairperson (and conference) passwords when these fields are left blank. For more 
information, see 

Reserve Resources for 
Video Participants

(Collaboration Server 
1500/2000/4000 only)

Enter the number of video participants for which the system must reserve resources.
Default: 0 participants.
Maximum: 
•

x Mode: 60 participants (Double card assembly)

x Mode: 30 participants (Single card assembly)

Reserve Resources for 
Audio Participants

(Collaboration Server 
1500/2000/4000 only)

Enter the number of audio participants for which the system must reserve resources. 
Voice resources must be allocated in the Video/Voice Port Allocation dialog box.
Default: 0 participants.
Maximum: 
•

x Mode: 720 participants (Double card assembly, with all ports are set to Audio 
Only).

x Mode: 360 participants (Single card assembly, with all ports are set to Audio Only).