Polycom 1500/1800/2000/4000 Manual De Usuario

 

Conferencing Modes Overview

Polycom®, Inc. 

16

● The HD_THRESHOLD_BITRATE flag must be set in the System Configuration. The value of this flag 

is the system minimum threshold bit rate for HD resolutions. The line rate selected in the conference 
Profile must be the same as or higher than that specified by the HD_THRESHOLD_BITRATE flag.

The HD_THRESHOLD_BITRATE flag line rate value ranges from 384kbps to 4Mbs, default is 

768kbps. For more information, see 

. 

The main parameters that define the quality of an AVC-based video conference and its display are:

● Line (Bit) Rate - The transfer rate of video and audio streams. The higher the line (bit) rate, the better 

the video quality. The MCU supports the following line rates:


Collaboration Server 1500/2000/4000 with MPMx card - 

64kbps to 

4096kbps



Collaboration Server 2000/4000 with MPMRx card / 

Collaboration Server 1800 - 64kbps to 6144kpbs

● Audio Algorithm - The audio compression algorithm determines the quality of the conference audio. 
● Video protocol, video format, frame rate, annexes, and interlaced video mode - These 

parameters define the quality of the video images. The RealPresnce Collaboration Server will send 

video at the best possible resolution supported by endpoints regardless of the resolution received 

from the endpoints. 


When Sharpness is selected as the Video Quality setting in the Conference Profile, the 

RealPresnce Collaboration Server will send 4CIF (H.263) at 15fps instead of CIF (H.264) at 30fps.



H.264 High Profile protocol provides better compression of video images in line rates lower than 

384 Kbps and it will be automatically selected for the endpoint if it supports H.264 High Profile. If 

the endpoint does not support H.264 High Profile, the RealPresnce Collaboration Server will try 

H.264 Base Profile which provides good compression of video images in line rates lower than 

384 Kbps (better than H.263 and not as good as H.264 High Profile).



When working with RealPresnce Collaboration Servers at low bit rates (128, 256, or 384Kbps), 

HDX endpoints will transmit SD15 resolution instead of 2CIF resolution.

When using a full screen (1x1) conference layout, the RealPresnce Collaboration Server transmits 

the same resolution it receives from the endpoint.

● Video resolution:



H.261 CIF/QCIF – Supported in Continuous Presence (CP) conferences at resolutions of 288 x 

352 pixels (CIF) and 144 x 176 pixels (QCIF). Both resolutions are supported at frame rates of up 

to 30 frames per second.



H.263 4CIF - A high video resolution available to H.263 endpoints that do not support H.264. It is 

only supported for conferences in which the video quality is set to sharpness and for lines rates 

of 384kbps to 1920kbps.



Standard Definition (SD) - A high quality video protocol which uses the H.264 and H.264 High 

Profile video algorithms. It enables compliant endpoints to connect to Continuous Presence 

conferences at resolutions of 720 x 576 pixels for PAL systems and 720 x 480 pixels for NTSC 

systems. 

The HD_THRESHOLD_BIT RATE flag is responsible for negotiation only, It does not guarantee that 
the endpoint will open an HD channel or transmit on an opened HD channel.