SMC Networks SMC2755W Manual De Usuario
22
by the network DHCP server. (Default: Disable)
Note: If there is no DHCP server on your network, then the
access point will automatically start up with its default IP
address, 192.168.1.20.
address, 192.168.1.20.
By using the Wireless Access Point’s built-in DHCP (Dynamic Host
Configuration Protocol) server, you are allowing the Wireless
Access Point to handle all the IP addressing on your Local Area
Network (LAN). This can save you much of the time and hassle of
setting up your network. If you have a server on your network that
requires a static IP address, you may still use the “DHCP Server”
and manually assign a static IP address to your server. (Default:
Disable)
Configuration Protocol) server, you are allowing the Wireless
Access Point to handle all the IP addressing on your Local Area
Network (LAN). This can save you much of the time and hassle of
setting up your network. If you have a server on your network that
requires a static IP address, you may still use the “DHCP Server”
and manually assign a static IP address to your server. (Default:
Disable)