Husqvarna LOGTH2448T Manual De Usuario

21

NOTE: Be sure mower side suspension 
arms (A) are pointing forward before slid-
ing mower under tractor.
3.   Slide mower under tractor until it is 

centered under tractor. 

02965

6.   ATTACH REAR LIFT LINKS (C) - Lift 

rear corner of mower and position 
slot in link assembly over pin on rear 
mower bracket (D) and secure with 
washer and retainer spring.

7.   Repeat on opposite side of tractor.

4.   ATTACH MOWER SIDE SUSPENSION 

ARMS (A) TO CHASSIS - Position hole 
in arm over pin (B) on outside of tractor 
chassis and secure with washer and 
retainer spring.

5.   Repeat on opposite side of tractor.

8.   Turn steering wheel to position wheels 

straight forward.

9.   ATTACH FRONT LINK (E) - Work from 

left side of tractor. Insert rod end of link 
assembly through front hole in trac-
tor front suspension bracket (F) and 
secure with large 7/16 retainer spring 
(G) through hole in link located behind 
the bracket.

10. Insert other end of link (E) into hole in 

front mower bracket (H) and secure 
with washer and small 5/16 retainer 
spring (J).

11. Disengage belt tension rod (K) from 

locking bracket (L).

12. Install belt onto engine clutch pulley (M).
IMPORTANT:  Check belt for proper rout-
ing in all mower pulley grooves.