Furuno B042-008 Manual De Usuario
3. INITIAL SETTINGS
3-12
3.6 Demonstration
Mode
The demonstration mode provides a simulated video sounder picture. Connection of the
transducer is not necessary. All controls are operational.
1. Turn on the power while pressing any key to display the installation main menu.
2. Press [+] to select DEMO.
transducer is not necessary. All controls are operational.
1. Turn on the power while pressing any key to display the installation main menu.
2. Press [+] to select DEMO.
XDCR SETTING INSTALLATION
DEMO
DEMO MODE
: OFF
[-/+]: Change setting, Turn OFF to exit
DEMO menu
3. Press ["] to select DEMO MODE, and then press [+] or [-] to open the dialog box.
OFF
ON
4. Use [+] or [-] to select ON or OFF (default setting) as appropriate, and then press [!] or
["] to close the dialog box.
5. Turn off the power.
6. Turn on the power again after five seconds. “<DEMO>” appears at the bottom of the
6. Turn on the power again after five seconds. “<DEMO>” appears at the bottom of the
screen when the demonstration mode is on.