Lowrance electronic HDS 7 Manual De Usuario
12
Bracket Mount
An alternative to flush mounting the HDS display is to bracket mount the unit. This method
has the advantage that the display can be easily removed when not in use and may be tilted to
achieve the best possible viewing angle.
1:
Loosely screw securing knobs to the
Display unit.
2:
Temporarily mount the display unit
in the bracket
3:
Make sure the display can be
adjusted to the correct angle without
interfering with the surrounding.
Allow space for cables attached to
the rear of the unit
4:
Remove the display unit and use the
mounting bracket as a template to
mark the four positions of the screw
holes and optional center cable hole.
5:
Drill a pilot hole for the four screws
and an optional hole large enough
for the cables to emerge from.
6:
Secure the bracket to the surface
7:
Connect the cables.