Kenwood TK-3230 Manual De Usuario

Turn the transceiver power off in the following locations:

•  In explosive atmospheres (inflammable gas, dust particles, 

metallic powders, grain powders, etc.).

•  While taking on fuel or while parked at gasoline service stations.

•  Near explosives or blasting sites.

•  In aircrafts.  (Any use of the transceiver must follow the 

instructions and regulations provided by the airline crew.)

•  Where restrictions or warnings are posted regarding the use of 

radio devices, including but not limited to medical facilities.

•  Near persons using pacemakers.

•  Do not disassemble or modify the transceiver for any reason.

•  Do not place the transceiver on or near airbag equipment while 

the vehicle is running.  When the airbag inflates, the transceiver 

may be ejected and strike the driver or passengers.

•  Do not transmit while touching the antenna terminal or if 

any metallic parts are exposed from the antenna covering.  

Transmitting at such a time may result in a high-frequency burn.

•  If an abnormal odor or smoke is detected coming from the 

transceiver, switch the transceiver power off immediately, remove 

the battery pack from the transceiver, and contact your Kenwood 

dealer.

•  Use of the transceiver while you are driving may be against traffic 

laws.  Please check and observe the vehicle regulations in your 

area.

•  Do not expose the transceiver to extremely hot or cold conditions.

•  Do not carry the battery pack (or battery case) with metal objects, 

as they may short the battery terminals.

•  When operating the transceiver in areas where the air is dry, it is 

easy to build up an electric charge (static electricity).  When using 

an earphone accessory in such conditions, it is possible for the 

transceiver to send an electric shock through the earphone and 

to your ear.  We recommend you use only a speaker/microphone 

in these conditions, to avoid electric shocks.