3com FE100 Manual De Usuario

Cluster Data Sheet

B-3

&OXVWHURUGHUQXPEHUBBBBBBBBBBBBBBBBBBBB

3UH,QVWDOODWLRQ6HWWLQJ

‡

For the optional PowerEdge Expandable RAID Controller, the RAID level and logical drives are configured and ini-
tialized on the internal hard-disk drives.

‡

Cable the system hardware for clustering.

‡

Low-level configuration of the QLogic host bus adapters.

6RIWZDUHDQG)LUPZDUH

‡

The driver version for the Intel Pro/100B (for PowerEdge 4300 systems) is 2.22 or later; the driver version for the 
Intel Pro/100+ (for PowerEdge 6300 and 6350 systems) is 3.00 or later.

‡

QLogic firmware version 1.23 or later.

‡

A 1024-MB partition has been created for the Windows NT Server, Enterprise Edition system hard-disk drive.

‡

Windows NT Server, Enterprise Edition 4.0 installed.

‡

Windows NT Service Pack revision: __________________

‡

The clusfixi.exe and scsifixi.exe hotfixes have been applied to the nodes (for Windows NT Service Pack 3 only).

:LQGRZV176HUYHU6HWWLQJV

‡

License type: _________________  Number: __________________

‡

Network names for these computers: Node 1 ___________________ Node 2 ___________________

‡

Domain type has been chosen (Primary Domain Controller, Backup Domain Controller, or stand-alone).

‡

Administrator user name: _________________

‡

Administrator password: _________________

‡

Network participation has been wired to the network.

‡

Microsoft IIS has been installed (optional).

‡

All network adapters have been found and accepted.

‡

Network protocol is TCP/IP only. Uncheck any others.

‡

SNMP service has been added.

‡

DHCP server is not selected.

‡

TCP/IP address for each NIC: 

Node 1, NIC 1 __________________  NIC 2 ___________________

Node 2, NIC 1 __________________  NIC 2 ___________________

‡

The subnet masks for NIC 1 and NIC 2 are different. Subnet masks for the NIC 1s should match. Subnet masks for 
the NIC 2s should match.

Node 1, NIC 1 __________________  NIC 2 ___________________

Node 2, NIC 1 __________________  NIC 2 __________________

 Before installing the Microsoft Windows NT Server, Enterprise Edition operating system with clustering, 

use this checklist to gather information and ensure the preparation required for a successful installation. Ensure that all 
equipment is present and properly cabled and that you know how to install Windows NT Server, Enterprise Edition.