3com WXR100 3CRWXR10095A Manual De Usuario
display tunnel
117
See Also
display tunnel
Shows the tunnels from the wireless LAN switch where you type the
command.
command.
Syntax —
display tunnel
Defaults — None.
Access — Enabled
History —Introduced in MSS Version 3.0.
Examples — To display all tunnels from a WX switch to other WX
switches in the Mobility Domain, type the following command.
switches in the Mobility Domain, type the following command.
WX4400# display tunnel
VLAN
Local Address
Remote Address State
Port LVID RVID
--------------- --------------- --------------- ------- ----- ----- -----
vlan-eng
192.168.14.2
192.168.14.4 DORMANT 1024 4096
130
Table 24 describes the fields in the display.
Hits
Number of packets whose source MAC address was a
client in this VLAN, and whose destination MAC address
was one of those listed under Permit MAC.
client in this VLAN, and whose destination MAC address
was one of those listed under Permit MAC.
Table 23 Output for display security 12-restrict
Field
Description
Table 24 Output for display tunnel
Field
Description
VLAN
VLAN name.
Local Address
IP address of the local end of the tunnel. This is the system
IP address of the wireless access switch where you enter
the command.
IP address of the wireless access switch where you enter
the command.