3com WXR100 3CRWXR10095A Manual De Usuario
308
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
clear ap radio
Disables a MAP radio and resets it to its factory default settings.
Syntax —
clear ap ap-num } radio {1 | 2 | all}
ap
ap-number
— Index value that identifies the MAP on the WX.
radio 1
— Radio 1 of the MAP.
radio 2
— Radio 2 of the MAP. (This option does not apply to
single-radio models.)
radio all
— All radios on the MAP.
Defaults — The clear ap radio command resets the radio to the default
settings listed in Table 51 and in Table 72 on page 416.
settings listed in Table 51 and in Table 72 on page 416.
Table 51 Radio-Specific Parameters
Parameter
Default Value
Description
antennatype
For most MAP models, the
default is internal.
default is internal.
For MP-620, the default
for the 802.11b/g radio is
ANT-1360-OUT. The
default for the 802.11a
radio is ANT-5360 OUT.
for the 802.11b/g radio is
ANT-1360-OUT. The
default for the 802.11a
radio is ANT-5360 OUT.
The default for the
802.11b/g radio on model
AP3150 is ANT1060.
802.11b/g radio on model
AP3150 is ANT1060.
External antenna model
Note: This parameter is
configurable only on MAPs
that support external
antennas.
configurable only on MAPs
that support external
antennas.
auto-tune
max-power—highest
setting allowed for the
country of operation or
highest setting
supported on the
hardware, whichever is
lower
setting allowed for the
country of operation or
highest setting
supported on the
hardware, whichever is
lower
max-retransmissions—
10 percent
10 percent
min-client-rate—5.5 Mb
ps for 802.11b/g;
24 Mbps for 802.11b/g
ps for 802.11b/g;
24 Mbps for 802.11b/g
RF Auto-Tuning settings:
max-power—maximum
power that RF Auto-Tuning
can set on a radio
power that RF Auto-Tuning
can set on a radio
max-retransmissions—ma
ximum percentage of
client retransmissions a
radio can experience
before RF Auto-Tuning
considers changing the
channel on the radio
ximum percentage of
client retransmissions a
radio can experience
before RF Auto-Tuning
considers changing the
channel on the radio
min-client-rate—minimum
rate at which a radio is
allowed to transmit traffic
to clients
rate at which a radio is
allowed to transmit traffic
to clients