3com WXR100 3CRWXR10095A Manual De Usuario
set ap boot-configuration vlan
375
WX1200# set ap 1 boot- configuration switch switch-ip
172.16.0.21 mode enable
success: change accepted.
The following command configures Distributed MAP 1 to use the WX
with the name wxr2 as its boot device. The DNS server at 172.16.0.1 is
used to resolve the name of the WX switch.
with the name wxr2 as its boot device. The DNS server at 172.16.0.1 is
used to resolve the name of the WX switch.
WX4400# set ap 1 boot-configuration switch name wxr2 dns
172.16.0.1 mode enable
success: change accepted.
See Also
set ap
boot-configuration
vlan
boot-configuration
vlan
Specifies 802.1Q VLAN tagging information for a Distributed MAP.
Syntax —
set ap ap-number boot-configuration vlan vlan-tag
tag-value [mode {enable | disable}]
Syntax —
set ap ap-number boot-configuration vlan mode
{enable | disable}
ap
ap-number
— Index value that indentifies the MAP on the WX.
vlan-tag
tag-value
— The VLAN tag value. You can specify a
number from 1 – 4095.
mode
{
enable
|
disable
} — Enables or disables use of the specified
VLAN tag on the Distributed MAP.
Defaults — None.
Examples — Enabled.
History —Introduced in MSS 4.2. Version 6.0 removed the dap option.