3com WXR100 3CRWXR10095A Manual De Usuario
584
C
HAPTER
16: RADIUS
AND
S
ERVER
G
ROUP
C
OMMANDS
See Also
set radius client
system-ip
system-ip
Causes all RADIUS requests to be sourced from the IP address specified by
the set system ip-address command, providing a permanent source IP
address for RADIUS packets sent from the WX switch.
the set system ip-address command, providing a permanent source IP
address for RADIUS packets sent from the WX switch.
Syntax —
set radius client system-ip
Defaults — None. If you do not use this command, RADIUS packets
leaving the WX have the source IP address of the outbound interface,
which can change as routing conditions change.
leaving the WX have the source IP address of the outbound interface,
which can change as routing conditions change.
Examples — Enabled.
History —Introduced in MSS Version 3.0.
Usage — The WX system IP address must be set before you use this
command.
command.
Examples — The following command sets the WX system IP address as
the address of the RADIUS client:
the address of the RADIUS client:
WX4400# set radius client system-ip
success: change accepted.
See Also