3com WXR100 3CRWXR10095A Manual De Usuario
76
C
HAPTER
4: P
ORT
C
OMMANDS
receive-etherstats
— Shows Ethernet statistics for received
packets.
transmit-etherstats
— Shows Ethernet statistics for transmitted
packets.
port port-list
— List of physical ports. If you do not specify a port
list, MSS shows statistics for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — You can specify one statistic type with the command.
Examples — The following command shows octet statistics for port 3:
WX1200> display port counters octets port 3
Port Status
Rx Octets
Tx Octets
=============================================================================
3
Up
27965420
34886544
This command’s output has the same fields as the monitor port counters
command. For descriptions of the fields, see Table 16 on page 84.
command. For descriptions of the fields, see Table 16 on page 84.
See Also
display port-group
Shows port group information.
Syntax —
display port-group [name group-name]
name
group-name
— Shows information for the specified port group.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0. In Version 4.2 the option all
was removed for simplicity. You can display information for all groups by
entering the command without specifying a group name.
was removed for simplicity. You can display information for all groups by
entering the command without specifying a group name.