Clarity 87392-11 Manual De Usuario

Clarity User Guide,

 

March 1, 2011 - Rev. 1.06 

                    

           Page 34

Touch Screen Calibration – In the upper right corner of the calibration screen there is a box 
titled Touch Screen Calibration.   

This calibration is done at the factory and does not need to be done on a regular basis, 
only if the touch screen fails. 
 
Select the box labeled Touch Screen Calibration.  After a second, the touch target will move 
and a new screen will appear.  In the center of the screen it will read Press the blinking X 
symbol until stop blinking. 
 

•  In the lower left corner of the screen a blinking X will appear and there will be a 

yellow to blue progress bar at the bottom of the screen. 

•  Hold your finger over the blinking X. 
•  When the X stops blinking, remove your finger and the X will move to the lower right 

hand corner.