3com WX4400 3CRWX440095A Manual De Usuario
196
C
HAPTER
7: IP S
ERVICES
C
OMMANDS
Usage — The inform or trap option specifies whether the MSS SNMP
engine expects the target to acknowledge notifications sent to the target
by the WX switch. Use inform if you want acknowledgements. Use trap
if you do not want acknowledgements. The inform option is applicable
to SNMP version v2c or usm only.
engine expects the target to acknowledge notifications sent to the target
by the WX switch. Use inform if you want acknowledgements. Use trap
if you do not want acknowledgements. The inform option is applicable
to SNMP version v2c or usm only.
Examples — The following command configures a notification target for
acknowledged notifications:
acknowledged notifications:
WX1200# set snmp notify target 1 10.10.40.9 usm inform user
securesnmpmgr1 snmp-engine-id ip
success: change accepted.
This command configures target 1 at IP address 10.10.40.9. The target’s
SNMP engine ID is based on its address. The MSS SNMP engine will send
notifications based on the default profile, and will require the target to
acknowledge receiving them.
SNMP engine ID is based on its address. The MSS SNMP engine will send
notifications based on the default profile, and will require the target to
acknowledge receiving them.
The following command configures a notification target for
unacknowledged notifications:
unacknowledged notifications:
WX1200# set snmp notify target 2 10.10.40.10 v1 trap
success: change accepted.
See Also