3com WX4400 3CRWX440095A Manual De Usuario

filter-id

Inbound or outbound 
ACL to apply to the 
user.

If configured in the WX local database, 
this attribute can be an access control 
list (ACL) to filter outbound or inbound 
traffic. Use the following format:

filter-id inboundacl.in

or 

filter-id outboundacl.out

If you are configuring the attribute on a 
RADIUS server, the value field of filter-id 
can specify up to two ACLs. Any of the 
following are valid: 

filter-id = "Profile=acl1"

filter-id = "OutboundACL=acl2"

filter-id = "Profile=acl1 
OutboundACL=acl2"

(Each example goes on a single line on 
the server.) The format in which to 
specify the values depends on the 
RADIUS server.

Regardless of whether the attributes 
are defined locally or on a RADIUS 
server, the ACLs must already be 
configured on the WX.

idle-timeout

This option is not implemented in the current MSS version.

mobility-profile

(network access 
mode only)

Mobility Profile attribute 
for the user. (For more 
information, see set 
mobility-profile on 
page 269.)

Name of an existing Mobility Profile, up 
to 32 alphanumeric characters, with no 
tabs or spaces. 

Note: If the Mobility Profile feature is 
enabled, and a user is assigned a 
Mobility Profile name that does not 
exist on the WX, the user is denied 
access.

Table 44   Authentication Attributes for Local Users (continued)