3com WX4400 3CRWX440095A Manual De Usuario
display mobility-domain
281
Usage — This command has no effect if the WX member is not
configured as part of a Mobility Domain or the current WX is not the
seed.
configured as part of a Mobility Domain or the current WX is not the
seed.
Examples — The following command clears a Mobility Domain member
with the IP address 192.168.0.1:
with the IP address 192.168.0.1:
WX1200# clear mobility-domain member 192.168.0.1
See Also
display
mobility-domain
mobility-domain
On the seed WX, displays the Mobility Domain status and members.
Syntax —
display mobility-domain
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 1.0.
Examples — To display Mobility Domain status, type the following
command:
command:
WX# display mobility-domain
Mobility Domain name: Pleasanton (security required)
Member
State
Type(*:active)
Model
Version
-----------
----------
------
-------
-------
10.8.107.1 STATE_UP
SEED*
WX-20
6.0.1.0
10.10.10.66 STATE_DOWN
MEMBER
Unknown
Unknown
Table 46 display mobility-domain Output
Field
Description
Mobility Domain name
Name of the Mobility Domain
Member
IP addresses of the seed WX and members in the Mobility
Domain
Domain
State
State of the WX in the Mobility Domain:
STATE_UP
STATE_DOWN