3com WX4400 3CRWX440095A Manual De Usuario
display radio-profile
351
Table 69 describes the fields in this display.
Table 69 Output for display radio-profile
Field
Description
Beacon Interval
Rate (in milliseconds) at which each MAP radio in the profile
advertises the beaconed SSID.
advertises the beaconed SSID.
DTIM Interval
Number of times after every beacon that each MAP radio in
the radio profile sends a delivery traffic indication map
(DTIM).
the radio profile sends a delivery traffic indication map
(DTIM).
Max Tx Lifetime
Number of milliseconds that a frame received by a radio in
the radio profile can remain in buffer memory.
the radio profile can remain in buffer memory.
Max Rx Lifetime
Number of milliseconds that a frame scheduled to be
transmitted by a radio in the radio profile can remain in
buffer memory.
transmitted by a radio in the radio profile can remain in
buffer memory.
RTS Threshold
Minimum length (in bytes) a frame can be for a radio in the
radio profile to use the RTS/CTS method to send the frame.
The RTS/CTS method clears the air of other traffic to avoid
corruption of the frame due to a collision with another
frame.
radio profile to use the RTS/CTS method to send the frame.
The RTS/CTS method clears the air of other traffic to avoid
corruption of the frame due to a collision with another
frame.
Frag Threshold
Maximum length (in bytes) a frame is allowed to be without
being fragmented into multiple frames before transmission
by a radio in the radio profile.
being fragmented into multiple frames before transmission
by a radio in the radio profile.
Long Preamble
Indicates whether an 802.11b radio that uses this radio
profile advertises support for frames with long preambles
only:
profile advertises support for frames with long preambles
only:
YES — Advertises support for long preambles only.
NO — Advertises support for long and short preambles.
Tune Channel
Indicates whether RF Auto-Tuning is enabled for dynamically
setting and tuning channels.
setting and tuning channels.
Tune Power
Indicates whether RF Auto-Tuning is enabled for dynamically
setting and tuning power levels.
setting and tuning power levels.
Tune Channel
Interval
Interval
Interval, in seconds, at which RF Auto-Tuning decides
whether to change the channels on radios in a radio profile.
At the end of each interval, MSS processes the results of the
RF scans performed during the previous interval, and
changes radio channels if needed.
whether to change the channels on radios in a radio profile.
At the end of each interval, MSS processes the results of the
RF scans performed during the previous interval, and
changes radio channels if needed.
Tune Power Interval
Interval, in seconds, at which RF Auto-Tuning decides
whether to change the power level on radios in a radio
profile. At the end of each interval, MSS processes the results
of the RF scans performed during the previous interval, and
changes radio power levels if needed.
whether to change the power level on radios in a radio
profile. At the end of each interval, MSS processes the results
of the RF scans performed during the previous interval, and
changes radio power levels if needed.