3com WX4400 3CRWX440095A Manual De Usuario
446
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
set service-profile
idle-client-probing
idle-client-probing
Disables or reenables periodic keepalives from MAP radios to clients on a
service profile’s SSID. When idle-client probing is enabled, the MAP radio
sends a unicast null-data frame to each client every 10 seconds. Normally,
a client that is still active sends an Ack in reply to the keepalive.
service profile’s SSID. When idle-client probing is enabled, the MAP radio
sends a unicast null-data frame to each client every 10 seconds. Normally,
a client that is still active sends an Ack in reply to the keepalive.
If a client does not send any data or respond to any keepalives before the
user idle timeout expires, MSS changes the client session to the
Disassociated state.
user idle timeout expires, MSS changes the client session to the
Disassociated state.
Syntax —
set service-profile name idle-client-probing
{enable | disable}
name
— Service profile name.
enable
— Enables keepalives.
disable
— Disables keepalives.
Defaults — Idle-client probing is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — The length of time a client can remain idle (unresponsive to
idle-client probes) is specified by the user-idle-timeout command.
idle-client probes) is specified by the user-idle-timeout command.
Examples — The following command disables idle-client keepalives on
service profile sp1:
service profile sp1:
WX4400# set service-profile sp1 idle-client-probing disable
success: change accepted.
See Also