3com WX4400 3CRWX440095A Manual De Usuario
diag
729
Examples — The following command displays the current setting of the
DHCP option:
DHCP option:
boot> dhcp
DHCP is currently enabled.
The following command disables the DHCP option:
boot> dhcp
DHCP is currently disabled.
See Also
diag
Accesses the diagnostic mode.
Syntax —
diag
Defaults — The diagnostic mode is disabled by default.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Usage — Access to the diagnostic mode requires a password, which is
not user configurable. Use this mode only if advised to do so by 3Com.
not user configurable. Use this mode only if advised to do so by 3Com.
dir
Displays the boot code and system image files on a WX switch.
Syntax —
dir [c: | d: | e: | f: | boot0 | boot1]
c:
— Nonvolatile storage area containing boot partition 0 (primary).
d:
— Nonvolatile storage area containing boot partition 1 (secondary).
e:
— Primary partition of the flash card in the flash card slot.
f:
— Secondary partition of the flash card in the flash card slot.
boot0
— Boot partition 0.
boot1
— Boot partition 1.
Defaults — None.