Polycom SIP 2.2.0 Manual De Usuario
Troubleshooting Your SoundPoint IP / SoundStation IP Phones
5 - 5
MAC address 00f4f200360b. The bootROM log file is uploaded to the boot
server after every reboot. The application log file is uploaded periodically or
when the local copy reaches a predetermined size.
Both log files can be uploaded on demand using a multiple key combination
Both log files can be uploaded on demand using a multiple key combination
described in
on page
. The phone uploads four
files, namely, mac-boot.log, app-boot.log, mac-now-boot.log, and
mac-now-app.log. The “now_” logs are uploaded manually.
The amount of logging that the phone performs can be tuned for the
The amount of logging that the phone performs can be tuned for the
application to provide more or less detail on specific components of the
phone’s software. For example, if you are troubleshooting a SIP signaling
issue, you are not likely interested in DSP events. Logging levels are adjusted
in the configuration files or via the web interface. You should not modify the
default logging levels unless directed to by Polycom Technical Support.
Inappropriate logging levels can cause performance issues on the phone.
In addition to logging events, the phone can be configured to automatically
In addition to logging events, the phone can be configured to automatically
execute command-line instructions at specified intervals that output run-time
information such as memory utilization, task status, or network buffer
contents to the log file. These techniques should only be used in consultation
with Polycom Technical Support.
Application Logging Options
Each of the components of the application software is capable of logging
events of different severity. This allows you to capture lower severity events
in one part of the application, while still only getting high severity event for
other components.
The parameters for log level settings are found in the sip.cfg configuration file.
The parameters for log level settings are found in the sip.cfg configuration file.
They are log.level.change.module_name. Log levels range from 1 to 6 (1 for
the most detailed logging, 6 for critical errors only).
When testing is complete, remember to return all logging levels to the default
value of 4.
There are other logging parameters that you may wish to modify. Changing
When testing is complete, remember to return all logging levels to the default
value of 4.
There are other logging parameters that you may wish to modify. Changing
these parameters does not have the same impact as changing the logging
levels, but you should still understand how your changes will affect the phone
and the network.
• log.render.level—Sets the lowest level that can be logged (default=1)
• log.render.file.size—Maximum size before log file is uploaded
(default=16 kb)
• log.render.file.upload.period—Frequency of log uploads (default is
172800 seconds = 48 hours)
• log.render.file.upload.append—Controls if log files on the boot
server are overwritten or appended, not supported by all servers