Honeywell NetAXS Manual De Usuario

Configuring via the Web Server
Configuring the System

– Use limits
– Card holder note 1
– Card holder note 2
– Access levels

: 

Use the field descriptions in the following table to complete the card fields and click 

:

Card Number(s)

Specifies the unique number by which the card holder will be 
identified. A card number is required.

Card Holder Name

Identifies the card holder. A card holder first and last name is 
required. Each name can have up to 25 characters.

Card Type

Specifies whether the card holder is a Supervisor, Employee, or a 
VIP. A temporary (Temp) flag can be set for each type of card holder. 
When the Temp flag is enabled, the expiration date becomes an 
active field. Note that the Temp box is active when the panel is 
configured for visitor cards in Configuration > System > General 
(see “

“ on page 14). A card type is required.

PIN

Specifies the Personal Identification Number (PIN) for the card 
holder. A PIN is optional; however, if the door reader is configured to 
require PIN identification (see “

“ on page 31), then you 

must create a PIN for the card holder here. The PIN number has a 
maximum of six digits.

Trace

Sends an alarm message to the alarm monitor whenever a card with 
trace enabled is presented at a reader. This feature provides a trace of 
the cardholder’s path through the facility.

Expiration Date

Specifies the date that a temporary employee’s card is de-activated. 

Use Limits

Specifies the number of times a card may be read at a card reader to 
which it has valid access. Specify the number-of-uses limit as the 
number of times access may be granted.

Note 1

Provides a user-defined field. See 

for information about how this field is defined for the Add New Card 
template.

Note 2

Provides a user-defined field. See 

for information about how this field is defined for the Add New Card 
template.