Polycom 3725-74600-004 Manual De Usuario

Descargar
Página de 624
Chapter 2-Conference Profiles
Polycom, Inc.
2-7
PAL systems and 720 x 480 pixels for NTSC systems. For more information, see 
.
High Definition (HD) – HD is an ultra-high quality video resolution that uses the 
H.264 and H.264 High Profile video algorithms. Depending on the Collaboration 
Server’s Card Configuration mode compliant endpoints are able to connect to 
conferences at the following resolutions:
720p (1280 x 720 pixels)  
.
Lost Packet Recovery (LPR) - LPR creates additional packets that contain recovery 
information used to reconstruct packets that are lost during transmission. 
Supplemental Conferencing Features
In addition to basic parameters that determine the quality of the video, additional features can 
be enabled, adding capabilities to the conference, or enabling special conferencing modes: 
Content Sharing (H.239) – Allows compliant endpoints to transmit and receive two 
simultaneous streams of conference data to enable Content sharing. H.239 is also 
supported in cascading conferences. Both H.263 and H.264 Content sharing protocols 
are supported. If all endpoints connected to the conference have H.264 capability, 
Content is shared using H.264, otherwise Content is shared using H.263.
For more information, see "Content Sharing” on page
Encryption – Used to enhance media security at conference and participant levels. For 
more information, see "Media Encryption” on page
Conference Recording - The Collaboration Server enables audio and video recording of 
conferences using Polycom RSS recording system.
Lecture Mode – The lecturer is seen by all participants in full screen while the lecturer 
views all conference participants in the selected video layout.
For more information, see "Lecture Mode (AVC CP Only)” on page
Presentation Mode (CP Conferences only) – When the current speaker’s speech 
exceeds a predefined time (30 seconds), the conference layout automatically changes to 
full screen, displaying the current speaker as the conference lecturer on all the 
participants’ endpoints. During this time the speaker’s endpoint displays the previous 
conference layout. When another participant starts talking, the Presentation Mode is 
cancelled and the conference returns to its predefined video layout. Presentation mode 
is available with Auto Layout and Same Layout.
If the speaker in a video conference is an Audio Only participant, the Presentation 
Mode is disabled for that participant.
Video forcing works in the same way as in Lecture Mode when Presentation Mode 
is activated, that is, forcing is only enabled at the conference level, and it only 
applies to the video layout viewed by the lecturer.