Toshiba 46TL900A Manual De Usuario

SETTING UP YOUR TV

19

The Security Key must adhere to these 

• 

conditions:
-  TKIP/AES: 8-63 ASCII or 64 Hex characters
-  WEP: 5 or 13 ASCII or 10 or 26 Hex 

characters

There is only one key ID to set for WEP 

• 

encryption.

 Press 

B or b to highlight Done and press 

OK.

If Network Name is not displayed, see 

• 

Manual Setup below to set Network Name 
before pressing Done.
If 

• 

BACK is pressed before Done is selected, 

settings are not saved.

When the message “Wireless confi guration 
is complete.” appears on screen, press OK.
The screen will skip to step 14.

m

 

In step 11, when you select Manual Setup;

Press OK, and the Manual Setup screen 
will appear. Press 

B or b to select Network 

Name and press OK.

The Software Keyboard window will appear 
(page 43).

Input the Network Name by using the 
Software Keyboard.

To save your setting, press the BLUE button.

Press 

B or b to select Authentication and 

then press 

C or c to select Open System, 

Shared Key, WPA-PSK or WPA2-PSK.

Press 

B or b to select Encryption, and then 

press 

C or c to select None, WEP, TKIP or 

AES.

Certain encryption types are only 

• 

compatible with specifi c authentication 
types.
-  When Authentication is Open System, only 

WEP or None is compatible.

-  When Authentication is Shared Key, only 

WEP is compatible.

-  When Authentication is WPA-PSK or WPA2-

PSK, only TKIP or AES is compatible.

When incompatible Authentication/

• 

Encryption pairings are detected, a 
warning message will be displayed, and 
no connection attempt will be made until 
the incompatibility is resolved.
There is only one key ID to set for WEP 

• 

encryption.

Press 

B or b to select Security Key and 

press OK. Input the Security Key by using 
the Software Keyboard (page 43).

To save your setting, press the BLUE button.

This item is grayed out when Encryption is 
None.

When Encryption is WEP, Key ID setting is 
available. Press 

B or b to select Key ID and 

press 

C or c to select 1(default), 2, 3 or 4.

Press 

B or b to select Done and press OK.

When the message “Wireless confi guration 
is complete.” appears on screen, press OK.

NOTE: Settings are not saved if BACK is 
pressed before Done is selected.

n

 The 

Advanced Network Setup screen will 

appear.

When the DHCP function of the router 
connected with this TV is On, you can set 
Auto Setup to On or Off . (This should 
usually be set to On.)

When the DHCP function of the router is 
Off , set Auto Setup to Off , and set the IP 
Address DNS address(es) manually.

You can view the fi xed MAC address for the 
TV and for the Dual Band WLAN Adaptor, if 
one is installed.

Press 

B or b to select Next.