Graco ISPC116BA Manual De Usuario
26
Pull on latch plate (fig. b). If belt slides freely
through latch plate, a locking clip MUST
be used (see Locking Clip section).
through latch plate, a locking clip MUST
be used (see Locking Clip section).
Some combination lap/shoulder belts with
sliding latch plates may be converted into an
“automatic locking mode” that will allow use
without a locking clip. See vehicle owner’ s
manual and label on vehicle belts for
instructions.
sliding latch plates may be converted into an
“automatic locking mode” that will allow use
without a locking clip. See vehicle owner’ s
manual and label on vehicle belts for
instructions.
>
Combination Lap/Shoulder
Belt with Sliding Latch Plate
Belt with Sliding Latch Plate
>
Combination Lap/Shoulder
Belt with Locking Latch Plate
Belt with Locking Latch Plate
The locking latch plate on some seat belts may
slip and loosen after being buckled on car seat if
positioned at a certain angle. If this happens,
flip the latch plate over (fig. c) and re-buckle.
Test installation again to see if this works. If
not, move car seat to another seating position.
slip and loosen after being buckled on car seat if
positioned at a certain angle. If this happens,
flip the latch plate over (fig. c) and re-buckle.
Test installation again to see if this works. If
not, move car seat to another seating position.
VEHICLE SEAT BELTS
(continued)
(fig. b)
Pull
(fig. c)
Flip