Cisco Systems AS5400 Manual De Usuario
6-4
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
78-13311-01
Chapter 6 Troubleshooting
LEDs
T3 DFC
ACTIVITY (ACT)
Fast flicker
Indicates DFC is up and running.
Slow flicker
Indicates DFC is not yet fully
functional.
functional.
OK/MAINT
On (Green)
The CT3 DFC passed initial
power-up diagnostics tests and is
operating normally.
power-up diagnostics tests and is
operating normally.
Yellow
The CT3 DFC is not functioning. See
the console for messages.
the console for messages.
Off
Indicates that all calls associated
with the DFC are shut down and it is
safe to remove the card with the
system powered on.
with the DFC are shut down and it is
safe to remove the card with the
system powered on.
M13 Alarm (MA)
On
Indicates the presence of one of the
following on the CT3 line:
Received Alarm Indication Signal
(RAIS), Loss Of Signal (LOS),
Receive RED Alarm (RRED), or a
Far-End Receive Failure(RFERF).
following on the CT3 line:
Received Alarm Indication Signal
(RAIS), Loss Of Signal (LOS),
Receive RED Alarm (RRED), or a
Far-End Receive Failure(RFERF).
1
Off
Remains off when operating
condition is normal.
condition is normal.
Remote Alarm
(RA)
(RA)
On
Indicates a T1 alarm condition
encountered by software.
encountered by software.
Off
Remains off when operating
condition is normal.
condition is normal.
Local Alarm (LA)
On
Indicates a T1 alarm condition
encountered by software for a
particular port.
encountered by software for a
particular port.
Off
Remains off when operating
condition is normal.
condition is normal.
T3 EN/DIS
Green
Indicates a CT3 card line connection
enabling normal operation.
enabling normal operation.
Yellow
Normal operation is disabled.
Low signal (LOS)
On
Indicates the CT3 LIU is
experiencing a loss of signal.
experiencing a loss of signal.
Off
Remains off when operating
condition is normal.
condition is normal.
Network Loop
(LOOP)
(LOOP)
On
Indicates that at least one T1 is
unavailable.
unavailable.
Off
Remains off when operating
condition is normal.
condition is normal.
Table 6-1
LEDs (continued)
DFC
LED
State
Description