GTO R4854 01 Manual De Usuario

  GTO 4000XLS Instruction Manual © 01.10.12

Loosen sealing nut on strain relief hub at bottom of control 

box.  Insert  power cable into control box through strain 

relief.  Thread approximately 6” of the power cable into the 

control box and retighten sealing nut until the power cable 

locks into place.

Insert the stripped power cable wires into the appropriate terminals on the MASTER OPERATOR terminal 

block.  Insert the green wire into the GRN terminal, white wire into WHT, blue wire into BLUE, brown wire 

into BRN, orange wire into ORG, red wire into RED, black wire into the BLK.
Tighten the set screws against the end of the wires.

to carry an adequate current. 

Sealing Nut

Hub

Lock Nut

Operator Power Cable

Strain Relief

Space for optional 
second 12 Volt battery
(see Accessory Catalog)

Space for 12 Volt 
battery (included).

Battery wires for
optional second battery.

Wire

Screwed into

wire insulation

Exposed strands

of wire