Moxa Technologies RS-422 Manual De Usuario
3-8
Industio CI-134 Series User’s Manual
3. Click on the [Pr oper ty] button to open the “MOXA Configur ation Panel”
dialog box. Please see steps 6-10 in the previous section, “Installing Driver”, for
more details.
more details.
In this configuration panel, you may:
l
Click [Pr oper ty] to enter “Property” dialog box to configure the selected
board with the correct “COM Number”, “INT Vector”, “Interrupt No” and
“Base I/O Port Address”. Please see steps 6 to 8 in the previous section,
“Installing Driver”, for more details, except that the “Board Type” field is not
supposed to be changed.
board with the correct “COM Number”, “INT Vector”, “Interrupt No” and
“Base I/O Port Address”. Please see steps 6 to 8 in the previous section,
“Installing Driver”, for more details, except that the “Board Type” field is not
supposed to be changed.
l
Click [Add] to add one more board that is not yet configured in the system.
Please see steps 6 to 8 in the previous section, “Installing Driver”, for more
details.
Please see steps 6 to 8 in the previous section, “Installing Driver”, for more
details.
l
Click [Remove] to remove the board currently selected from the configured
board list.
board list.
l
Click [OK] to confirm the configuration changes you made.
l
Click [Cancel] to leave the dialog with the configuration unchanged.