Cisco Systems 2960 Manual De Usuario

Automatic advise (auto-advise)—when the auto-upgrade process cannot find appropriate 
version-mismatch member software to copy to the switch in version-mismatch mode, the 
auto-advise process tells you the command (archive copy-sw or archive download-sw privileged 
EXEC command) and the image name (tar filename) needed to manually upgrade the switch stack 
or the switch in version-mismatch mode. The recommended image can be the running stack image 
or a tar file in any flash file system in the stack (including the switch in version-mismatch mode). If 
an appropriate image is not found in the stack flash file systems, the auto-advise process tells you 
to install new software on the stack. Auto-advise cannot be disabled, and there is no command to 
check its status.

The auto-advise software does not give suggestions when the stack software and the software of the 
switch in version-mismatch mode do not contain the same feature sets.The same events occur when 
cryptographic and noncryptographic images are running.

You can use the archive-download-sw /allow-feature-upgrade privileged EXEC command to 
allow installing an image with a different feature set.

When you add a switch that has a different minor version number to the stack, the software displays 
messages in sequence (assuming that there are no other system messages generated by the switch). 

This example shows that the stack detected a new switch that is running a different minor version number 
than the stack. Auto-copy launches, finds suitable software to copy from a member to the switch in 
version-mismatch mode, upgrades the switch in version-mismatch mode, and then reloads it:

*Mar 11 20:31:19.247:%STACKMGR-6-STACK_LINK_CHANGE:Stack Port 2 Switch 2 has changed to 

state UP

*Mar 11 20:31:23.232:%STACKMGR-6-SWITCH_ADDED_VM:Switch 1 has been ADDED to the stack 

(VERSION_MISMATCH)

*Mar 11 20:31:23.291:%STACKMGR-6-SWITCH_ADDED_VM:Switch 1 has been ADDED to the stack 

(VERSION_MISMATCH) (Stack_1-3)

*Mar 11 20:33:23.248:%IMAGEMGR-6-AUTO_COPY_SW_INITIATED:Auto-copy-software process 

initiated for switch number(s) 1

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Searching for stack member to act

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:as software donor...

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Found donor (system #2) for

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:member(s) 1

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:System software to be uploaded:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:System Type:            0x00000000

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving  (directory)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving /.bin (4945851 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving /info (450 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:archiving info (104 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:examining image...

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting info (104 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting /info (450 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:extracting info (104 bytes)

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:Stacking Version Number:1.4

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:System Type:            0x00000000

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Ios Image File Size:  0x004BA200

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Total Image File Size:0x00818A00

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Minimum Dram required:0x08000000

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image Suffix:universalk9-122-53.SE

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image Directory:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image Name:

*Mar 11 20:36:15.038:%IMAGEMGR-6-AUTO_COPY_SW:  Image 

Feature:IP|LAYER_3|PLUS|MIN_DRAM_MEG=128