Cisco Systems 2960 Manual De Usuario

Beginning in global configuration, follow these steps to configure a VLAN group and to map a VLAN 
to it:

This example shows how to configure the VLAN groups, to map the VLANs to the groups, to and verify 
the VLAN group configurations and mapping to the specified VLANs:

switch(config)# vlan group eng-dept vlan-list 10

switch(config)# show vlan group group-name eng-dept

Group Name                      Vlans Mapped

-------------                   --------------

eng-dept                        10

switch# show dot1x vlan-group all

Group Name                      Vlans Mapped

-------------                   --------------

eng-dept                        10

hr-dept                         20

This example shows how to add a VLAN to an existing VLAN group and to verify that the VLAN was 
added:

switch(config)# vlan group eng-dept vlan-list 30

switch(config)# show vlan group eng-dept

Group Name                      Vlans Mapped

-------------                   --------------

eng-dept                        10,30

This example shows how to remove a VLAN from a VLAN group:

switch# no vlan group

 

 

10

This example shows that when all the VLANs are cleared from a VLAN group, the VLAN group is 
cleared:

switch(config)# no vlan group eng-dept vlan-list 30

Vlan 30 is successfully cleared from vlan group eng-dept.

switch(config)# show vlan group group-name eng-dept

This example shows how to clear all the VLAN groups:

switch(config)# no vlan group end-dept vlan-list all

switch(config)# show vlan-group all

For more information about these commands, see the Cisco IOS Security Command Reference.

vlan group vlan-group-name vlan-list vlan-list

Configure a VLAN group, and map a single VLAN or a range of 
VLANs to it.

show vlan group all vlan-group-name

Verify the configuration.

no vlan group vlan-group-name vlan-list 
vlan-list

Clear the VLAN group configuration or elements of the VLAN 
group configuration.