Cisco Systems 2960 Manual De Usuario
C H A P T E R
12-1
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
12
Configuring Interface Characteristics
This chapter defines the types of Catalyst 2960 and 2960-S interfaces and describes how to configure
them.
them.
•
•
•
•
•
•
•
•
Note
For complete syntax and usage information for the commands used in this chapter, see the switch
command reference for this release and the Cisco IOS Interface Command Reference, Release 12.2 from
the Cisco.com page under Documentation > Cisco IOS Software Release > 12.2 Mainline >
Command References.
command reference for this release and the Cisco IOS Interface Command Reference, Release 12.2 from
the Cisco.com page under Documentation > Cisco IOS Software Release > 12.2 Mainline >
Command References.
Understanding Interface Types
This section describes the different types of supported interfaces with references to chapters that contain
more detailed information about configuring these interfaces.
more detailed information about configuring these interfaces.
Note
The stack ports on the rear of the switch are not Ethernet ports and cannot be configured.
•
•
•
•
•
•