Cisco Systems 2960 Manual De Usuario

      4 :    40 41 42 43 44 45 46 47 48 49

      5 :    50 51 52 53 54 55 56 57 58 59

      6 :    60 61 62 63 

In the above DSCP-to-DSCP-mutation map, the mutated values are shown in the body of the matrix. The 
d1 column specifies the most-significant digit of the original DSCP; the d2 row specifies the 
least-significant digit of the original DSCP. The intersection of the d1 and d2 values provides the mutated 
value. For example, a DSCP value of 12 corresponds to a mutated value of 10.

Catalyst 2960-S switches do not support ingress queueing.

Depending on the complexity of your network and your QoS solution, you might need to perform all of 
the tasks in the next sections. You will need to make decisions about these characteristics:

Which packets are assigned (by DSCP or CoS value) to each queue?

What drop percentage thresholds apply to each queue, and which CoS or DSCP values map to each 
threshold?

How much of the available buffer space is allocated between the queues?

How much of the available bandwidth is allocated between the queues?

Is there traffic (such as voice) that should be given high priority?

These sections contain this configuration information:

(optional)

 (optional)

 (optional)

 (optional)

Catalyst 2960-S switches do not support ingress queueing.

You can prioritize traffic by placing packets with particular DSCPs or CoSs into certain queues and 
adjusting the queue thresholds so that packets with lower priorities are dropped.