Cisco Systems 2960 Manual De Usuario
33-80
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
Chapter 33 Configuring QoS
Displaying Standard QoS Information
show mls qos maps [cos-dscp | cos-input-q |
cos-output-q | dscp-cos | dscp-input-q | dscp-mutation
dscp-mutation-name | dscp-output-q | ip-prec-dscp |
policed-dscp]
cos-output-q | dscp-cos | dscp-input-q | dscp-mutation
dscp-mutation-name | dscp-output-q | ip-prec-dscp |
policed-dscp]
Display QoS mapping information.
show mls qos queue-set [qset-id]
Display QoS settings for the egress queues.
show policy-map [policy-map-name [class
class-map-name]]
class-map-name]]
Display QoS policy maps, which define classification criteria for
incoming traffic.
incoming traffic.
Note
Do not use the show policy-map interface privileged
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
EXEC command to display classification information
for incoming traffic. The control-plane and interface
keywords are not supported, and the statistics shown in
the display should be ignored.
show running-config | include rewrite
Display the DSCP transparency setting.
Table 33-15
Commands for Displaying Standard QoS Information (continued)
Command
Purpose