Cisco Systems 2960 Manual De Usuario
C H A P T E R
36-1
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
36
Configuring IPv6 MLD Snooping
Note
To use IPv6 MLD Snooping, the switch must be running the LAN Base image.
You can use Multicast Listener Discovery (MLD) snooping to enable efficient distribution of IP
version 6 (IPv6) multicast data to clients and routers in a switched network on the Catalyst 2960 and
2960-S switches. Unless otherwise noted, the term switch refers to a standalone switch and to a switch
stack.
version 6 (IPv6) multicast data to clients and routers in a switched network on the Catalyst 2960 and
2960-S switches. Unless otherwise noted, the term switch refers to a standalone switch and to a switch
stack.
Note
Stacking is supported only on Catalyst 2960-S switches running the LAN base image.
Note
To use IPv6 on a Catalyst 2960 switch, you must configure the dual IPv4 and IPv6 Switch Database
Management (SDM) template on the switch. You select the template by entering the sdm prefer
dual-ipv4-and-ipv6 default global configuration command. This template is not required on a Catalyst
2960-S switch.
Management (SDM) template on the switch. You select the template by entering the sdm prefer
dual-ipv4-and-ipv6 default global configuration command. This template is not required on a Catalyst
2960-S switch.
For related information, see these chapters:
•
For more information about SDM templates, see
•
For information about IPv6 on the switch, see
Note
For complete syntax and usage information for the commands used in this chapter, see the command
reference for this release or the Cisco IOS documentation referenced in the procedures.
reference for this release or the Cisco IOS documentation referenced in the procedures.
This chapter includes these sections:
•
•
•