Cisco Systems 2960 Manual De Usuario
24-4
Catalyst 2960 and 2960-S Switch Software Configuration Guide
OL-8603-09
Chapter 24 Configuring UDLD
Configuring UDLD
Configuring UDLD
These sections contain this configuration information:
•
•
•
•
•
Default UDLD Configuration
shows the default UDLD configuration.
Configuration Guidelines
These are the UDLD configuration guidelines:
•
UDLD is not supported on ATM ports.
•
A UDLD-capable port cannot detect a unidirectional link if it is connected to a UDLD-incapable
port of another switch.
port of another switch.
•
When configuring the mode (normal or aggressive), make sure that the same mode is configured on
both sides of the link.
both sides of the link.
Caution
Loop guard works only on point-to-point links. We recommend that each end of the link has a directly
connected device that is running STP.
connected device that is running STP.
Table 24-1
Default UDLD Configuration
Feature
Default Setting
UDLD global enable state
Globally disabled
UDLD per-port enable state for fiber-optic media
Disabled on all Ethernet fiber-optic ports
UDLD per-port enable state for twisted-pair (copper) media
Disabled on all Ethernet 10/100 and 1000BASE-TX ports
UDLD aggressive mode
Disabled