3com S24x Manual De Usuario
About the PathBuilder S24x, 26x, and 27x switch
1-41
Hardware Components
10BaseT Transceiver
Description
This transceiver is designed to provide Ethernet 10baseT support for the PathBuilder
S24x, 26x, and 27x switch. It can accommodate different 10BaseT configurations
through the user-selectable Signal Quality Error (SQE) function. See Figure 1-24.
Some network devices do not recognize this signal. If the attached network device
does not recognize this SQE signal, set the switch to Off.
S24x, 26x, and 27x switch. It can accommodate different 10BaseT configurations
through the user-selectable Signal Quality Error (SQE) function. See Figure 1-24.
Some network devices do not recognize this signal. If the attached network device
does not recognize this SQE signal, set the switch to Off.
Figure 1-24. 10BaseT Transceiver
The 10BaseTransceiver can be connected to the Ethernet LAN (ELAN) card or the
PathBuilder S24x, 26x, and 27x switch’s Port 4.
PathBuilder S24x, 26x, and 27x switch’s Port 4.
RJ45 Connector
15-Pin D-Type Connector
SQUE Switch