3com S24x Manual De Usuario
PathBuilder S24x, 26x, and 27x Switch Hardware Installation
3-7
Configuring the PathBuilder S24x, 26x, and 27x Switch for DSU Operation
Configuring the PathBuilder S24x, 26x, and 27x Switch for DSU
Operation
Operation
Configuration
Procedure
Procedure
Perform these steps from the CTP to configure the PathBuilder S24x, 26x, and 27x
switch for DSU operation:
switch for DSU operation:
Step
Action
1
Refer to the PathBuilder S200 Series Basic Protocols. However, you do
not need to complete these configuration parameters:
not need to complete these configuration parameters:
• Clock Speed
• Connection Type
• Port Control
2
Configure the clock source parameter under port configuration as
follows:
follows:
INT
Use this parameter when providing
clock to the network.
clock to the network.
EXT
Use this parameter when using the
network-provided clock
(usual mode for DSU operation).
network-provided clock
(usual mode for DSU operation).