Combi 8000 Series Manual De Usuario

The vehicle lap belt must be tight around the car seat and must stay tight.  Check 
for a secure installation - pull front to back and side to side.  If the car seat is not 
tightly secured, remove the belt lock-off and repeat steps 1 and 2.  

If car seat cannot be held tightly, check vehicle owner’s manual, see “Vehicle Seat 
Belt” section or move it to another seating location.  If there is not a location that 
will keep the car seat secured with the lap belt, contact your vehicle dealer to have 
a lap belt installed in your vehicle.

To remove the belt lock-off:

Release seat belt buckle.

Pivot lock tab up and open belt lock-off.

This child restraint system conforms to all applicable Federal Motor Vehicle Safety Standards for use in motor 
vehicles and aircraft.

DO NOT use after 7 years from date of manufacture on label.

Car seat parts can get very hot in the sun or warm weather.

Protect vehicle seat.  Use a thin car seat mat, thin towel or thin blanket under and behind car seat.

This restraint is Certified for Use in Motor Vehicles and Aircraft (see label on car seat).

Contact airline about their policy on use of child restraints on the Aircraft.

Use this car seat only on forward-facing aircraft seats.

Install car seat on aircraft the same way it is installed in a vehicle.

Store instruction manual inside LATCH storage compartment located in lower base.