Britax 55 Manual De Usuario

Descargar
Página de 70
34
Lap-Shoulder Belt Installation
Before You Begin:
•  Check that your vehicle belt is compatible for use with  
child seats. See pages 8  13 for more information.
*  If your vehicle seat belt system includes a locking feature, 
use of the lock-offs is not required as long as the vehicle seat 
belt system is locked. Check your vehicle owner’s manual 
to determine how to lock your vehicle seat belt system when 
installing a child restraint.
•  This child seat must be reclined to position 3 and placed 
rear-facing on the vehicle seat.  
*  When properly installed in the rear-facing 
position, the back angle of the child seat 
should be at least 30˚ for children and 
up to 45˚ from vertical for infants unable 
to maintain head and neck control (not 
to exceed 45˚) when the car is parked 
on a level surface. Use the blue line as a 
guide to achieve the proper recline angle 
for rear-facing installations. The blue line 
will be parallel to the ground when the child seat angle is at the 
center of the angle range (30 – 45˚). If necessary, the proper 
recline angle can be achieved by placing a rolled towel or pool 
noodle in the vehicle seat bight.
•  Britax recommends that the Versa-Tether is used at all times. 
Using the tether will improve the stability of the child seat and 
reduce the risk of injury. Check your vehicle owner’s manual for 
tether anchor locations. See page 27 for possible rear-facing 
tether configurations.
Rear-Facing Installation