Graco 24K960 Manual De Usuario

1.

Relieve pressure, page 8.

2.

Place drip pan or rags under sprayer to catch 
hydraulic oil that drains out.

3.

Remove drain plug. Allow hydraulic oil to drain.

4.

Unscrew filter (227) slowly - oil runs into groove and 
drains out rear.

1.

Apply a light film of oil on filter gasket. Install drain 
plug and oil filter (227). Tighten oil filter 3/4 turn after 
gasket contacts base.

2.

Fill with five quarts of Graco hydraulic oil 169236 (5 
gallon/20 liter) or 207428 (1 gallon/3.8 liter).

3.

Check oil level.

This equipment stays pressurized until pressure is 
manually relieved. To help prevent serious injury from 
pressurized fluid, such as skin injection, splashing 
fluid and moving parts, follow the Pressure Relief 
Procedure when you stop spraying and before 
cleaning, checking, or servicing the equipment.

227

ti2271a