OKI ML590 Manual De Usuario
Important Safety Instructions
Your OKIDATA printer has been carefully designed to give you years of safe, reliable performance. As with all
electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or
damaging the unit:
electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or
damaging the unit:
•
Read the setup and operating instructions in this handbook carefully. Be sure to save it for future reference.
•
Read and follow all warning and instruction labels on the printer itself.
•
Unplug the printer before you clean it. Use only a damp cloth; do not use liquid or aerosol cleaners.
•
Place your printer on a firm, solid surface. If you put it on something unsteady, it might fall and be damaged;
if you place it on a soft surface, such as a rug, sofa, or bed, the vents may be blocked, causing it to overheat.
if you place it on a soft surface, such as a rug, sofa, or bed, the vents may be blocked, causing it to overheat.
•
To protect your printer from overheating, make sure no openings on the printer are blocked. Don’t put the
printer on or near a heat source, such as a radiator or heat register. If you put the printer in any kind of enclo-
sure, make sure it is well ventilated.
printer on or near a heat source, such as a radiator or heat register. If you put the printer in any kind of enclo-
sure, make sure it is well ventilated.
•
The printhead can get quite hot when it’s been printing for a length of time. Don’t touch the printhead until
it’s had a chance to cool.
it’s had a chance to cool.
•
Do not use your printer near water, or spill liquid of any kind into it.
•
Be certain that your power source matches the rating listed on the back of the printer. If you're not sure,
check with your dealer or with your local power company.
check with your dealer or with your local power company.
•
Your printer has a grounded, 3-prong plug as a safety feature, and it will only fit into a grounded outlet. If
you can't plug it in, chances are you have a non-grounded outlet; contact an electrician to have it replaced
with a grounded outlet. Do not use an adapter to defeat the grounding.
you can't plug it in, chances are you have a non-grounded outlet; contact an electrician to have it replaced
with a grounded outlet. Do not use an adapter to defeat the grounding.
•
The printer must be installed near a power outlet which remains easily accessible.
•
To avoid damaging the power cord, don’t put anything on it or place it where it will be walked on. If the
cord becomes damaged or frayed, replace it immediately.
cord becomes damaged or frayed, replace it immediately.
•
If you’re using an extension cord or power strip with the printer, make sure that the total of the amperes
required by all the equipment on the extension is less than the extension’s rating. Generally, the total ratings
of all equipment plugged into any one power line should not exceed 15 amperes. Don’t exceed this unless
you know that the power line your equipment is plugged into has a rating above 15 amperes.
required by all the equipment on the extension is less than the extension’s rating. Generally, the total ratings
of all equipment plugged into any one power line should not exceed 15 amperes. Don’t exceed this unless
you know that the power line your equipment is plugged into has a rating above 15 amperes.
•
Aside from the routine maintenance described in this handbook, don’t try to service the printer yourself;
opening the cover may expose you to shocks or other hazards. Don’t make any adjustments other than those
outlined in the handbook — you might cause damage requiring extensive repair work.
opening the cover may expose you to shocks or other hazards. Don’t make any adjustments other than those
outlined in the handbook — you might cause damage requiring extensive repair work.
•
If anything happens that indicates that your printer is not working properly or has been damaged, unplug it
immediately and have your printer serviced. These are some of the things to look for:
immediately and have your printer serviced. These are some of the things to look for:
⇒
The power cord or plug is frayed or damaged.
⇒
Liquid has been spilled into the housing, or the printer has been exposed to water.
⇒
The printer has been dropped or its cabinet has been damaged.
⇒
The printer doesn't function normally when you're following the operating instructions.