OKI C830 Manual De Usuario

Menu functions - C810 > 21

This section lists the menus accessed via the controls on the printer’s operator panel and 

displayed in the LCD window.

It should be noted that many of these settings can be, and often are, overridden by settings 

in the Windows printer drivers. However, several of the driver settings can be left at 

“Printer Setting”, which will then default to the settings entered in these printer menus.
Where applicable, factory default settings are shown in bold type in the following tables.
In the normal operating condition, known as “standby,” the printer’s LCD window will show 

“ONLINE.” In this condition, to enter the menu system, press the +/– buttons on the 

operator panel to move up and down through the list of menus until the menu you wish to 

view is displayed. Then proceed as follows:
1.

Press ENTER to enter the menu.

ON:Ready to receive data.
Blinking:Processing data.
OFF: Offline.

Displays the printer status and any 
error messages.

Enters the Menu mode. In 
Menu mode, forwards or 
reverses the menu item 
displayed.
Press for 2 secs. or longer to 
fast forward or reverse.

Switches between ONLINE and 
OFFLINE.
Exits the menu and goes ONLINE 
when pressed in the Menu mode.
Scrolls the HELP screen.
Forces printing on the paper currently 
loaded when pressed with “WRONG 
PAPER” or “WRONG PAPER SIZE” 
displayed.

ON: A warning occurs. 
Printing is possible.
Blinking: An error occurs. 
Printing not possible.
OFF: Normal condition.

Returns to the previous higher level 
menu item.

In the ONLINE or OFFLINE 
mode: enters the Menu 
mode.
In the Menu mode: 
determines the setting 
selected.

Deletes the data being printed or 
received when pressed for two 
seconds or longer.
Deletes the data when pressed for 
two seconds or longer with WRONG 
PAPER SIZE, RUN OUT OF PAPER, 
TRAY 1 IS OPEN, or TRAY 1 IS NOT 
FOUND is displayed.

C

M

Y

K

C M Y K