OKI C830 Manual De Usuario

Installing upgrades > 77

The basic C830 printer model comes equipped with 256MB of main memory. This can be 

upgraded with an additional memory board of 256MB or 512MB, giving a maximum total 

memory capacity of 768MB.
Installation takes a few minutes, and requires a medium size cross-head (philips type) 

screwdriver.
1.

Switch the printer off and disconnect the AC power cable.

Press the cover release (a) and open the printer’s top cover fully.

Pull down the MP Tray using the depressions (b). Lift the front cover release lever 

and lower the front cover.

Remove the screw (

a

) securing the right-hand side cover.

Lift the edge of the side cover slightly and pull the cover away from the printer at the 

top. Lift the cover slightly to detach it from the printer. Place it safely to one side.

Carefully remove the new memory board from its wrapping. Try to handle the board 

only by its short edges, avoiding contact with any metal parts as far as possible. In 

particular, avoid touching the edge connector.

5.

4.