Bradford-White Corp PE-2-XR504T6FBN Manual De Usuario

Descargar
Página de 16
 Minimum Clearances 
(Replaces pg. 9 in instruction manual.) 
 
 WARNING
 
Failure to adhere to these installation and operating instructions may create a hazard to 
life and property and will nullify the warranty. 
 
This installation must allow access to the front of the water heater and adequate 
clearance must be provided for servicing and operating this water heater.  The water 
heater may be installed on either a combustible or non-combustible floor.  If the water 
heater is to be installed directly on carpeting, it must be installed on top of a metal or 
wood panel (or equivalent) extending beyond the full width and depth of the water 
heater by at least 3 in. (7.6 cm) in any direction or, if the appliance is to be installed in 
an alcove or closet, the entire floor must be covered by the panel.  If the rating plate or 
the label on the front of the heater specifies minimum clearances less than those listed 
in the below table, the water heater must be installed in accordance with the minimum 
clearances listed on the rating plate or the label on the front of the heater. 
 
If it is necessary to install this water heater in an alcove, use the clearances listed in 
Figure 1. 
 
 
 
 
 
 
         
 
 
 
 
 
 
 
 
 
 
 
Figure 1. Minimum Clearances for an Alcove Installation.