OKI 4600 Manual De Usuario

B4400/4500/4550/4600 User’s Guide

70

recommended that you manually set the printer to match the 

media as described here.

The print quality for different types of paper is adjusted by 

changing the media type as follows:

Start the Status Monitor.

Click on [Printer Setup] tab - [Printer Menu] button - 

[Paper] tab. Click on the button for the paper tray being 

used. Adjust the media type to the required setting and, 

if necessary, the paper size to the size of the paper being 

used.

Click on the [Apply] button, [Close] button then [OK] 

button to set the printer to the new media type and 

printing quality.

Printing transparencies
When printing transparencies, the manual feed must be used 

and the media type changed to transparencies as follows

:

Damage to the printer may occur if the incorrect setting is used 

when printing transparencies.

Open the manual feed on the printer and place the 

transparency face up between the paper guides.

Adjust the paper guides to the width of the transparency.

Start the Status Monitor.

Click on [Printer Setup] tab - [Printer Menu] button - 

[Paper tab] - [Manual Feed] button. Adjust the media 

type to Transparency and the paper size to the size of the 

transparency being used.

Click on the [Apply] button, [Close] button then [OK] 

button to set the printer for transparencies.

NOTE: Remember to reset the printer for normal paper after 

printing transparencies.

Using the control panel on your printer, you can choose:

• which paper to use
• the size of the paper you wish to use