Maytag 1800 W - 2005 Manual De Usuario

To avoid the risk of electrical shock, personal injury, or death,
disconnect power to oven and discharge the capacitors before
following any disassembly procedure.

©2006 Maytag Services

16026795

25

A microwave leakage test must be performed anytime
a door assembly is removed, replaced, disassembled,
or adjusted for any reason.

Door Removal
1. Disconnect power to oven.
2. Open oven door, remove top hinge cap, and slowly lift

door to disengage the hinge pins at top and bottom.

3. To reinstall door, place top pin into slot first, then align

bottom pin.

4. Reinstall top hinge cap.

1. Disconnect power to oven.
2. Remove oven door, (see "Door Removal").
3. Begin at the bottom of the door near hinge, insert flat

blade screwdriver between choke cover and outer door
panel. Gently pry upward on choke cover to release
tabs. Work in clockwise direction to remove choke
cover.

To avoid property damage, care must be taken when
prying choke cover from oven door.

4. Remove screw securing door handle to latch

assembly.

5. Slide latch assembly downward and pull away from

door frame to release.

6. Remove screws securing choke assembly to outer

door panel.

NOTE: When disassembling door, use caution to

prevent deformation of slats on door frame/choke
assembly.

7. Begin at hinge side of door near bottom, insert flat

blade screwdriver between door frame/choke
assembly and outer door panel. Gently pry outer door
panel away from door frame to release tabs. Work in
clockwise direction to remove door frame.

8. Remove spring from hinge assembly.
9. Remove screws securing hinge assembly to choke

assembly.

10. Reassemble in reverse order.

A microwave leakage test must be performed anytime
a door assembly is removed, replaced, disassembly, or
adjusted for any reason.