Verilux CWST1 Manual De Usuario

Your ClearWave

®

 Deluxe Phototherapy Skincare System is made from 

high quality materials that will last for many years with minimum care.
You may want to periodically clean the inside of the lens and outside 
parts, using a mild non-abrasive cleaner and soft cloth. When cleaning, 
make sure you have turned off and unplugged the unit, and allowed 
suffi cient time for the unit to cool.

Cleaning the lens is important for maintaining optimum light output. 
Periodically remove the lens (refer to lens removal instructions) and 
clean with soft damp cloth. All liquid should be properly wiped away 
and dried prior to restoring power.

Light fl ickers.
If bulb fl ickers when turned on, 
the bulb is not seated fully into the 
socket. If this occurs, repeat the 
bulb installation process applying 
additional force to ensure that the 
bulb is inserted fully into the socket.

Does not illuminate.
Make sure that the bulbs are 
secured into the sockets. 
Sometimes in shipping they 
will come loose. Try a different 
grounded outlet. In many cases, 
this will correct the problem.

Only one bulb illuminates.
If only one bulb illuminates, it 
is most likely a bad bulb.Try 
swapping bulbs and turn on again. 
If the same bulb fails to illuminate 
in the swapped position, the bulb 
needs to be replaced.

Bulb blackening at the ends.
This is a common phenomenon 
with most fl uorescent tubes as they 
age. The black areas don’t affect 
operation except to slightly reduce 
the amount of light available since 
the phosphor in that area is dead. 
Bulb replacement is recommended.